Professional 3D Printing Materials for Digital Dentistry


Professional Materials for Digital Dentistry

Formlabs dental resins empower you to rapidly manufacture a range of dental products, all in-house, from biocompatible surgical guides to orthodontic models, splints, retainers and aligners.

Dental Model Resin

Designed for crown and bridge models with removable dies, Dental Model Resin is a high-precision, high-accuracy resin. Print crisp margins and contacts within ± 35 microns, and removable dies with consistently tight fit. A smooth, matte surface finish and color similar to gypsum make it easy to switch from analog to digital model production. Download our application guide for detailed instructions.

Dental Model Resin

An in-depth accuracy study established the precision and accuracy performance of Dental Model Resin. Margins, die surfaces, and contact points were found to be accurate within ± 35 microns of the digital model over 80 percent of surface points when printed on 25 micron print settings. Global accuracy across a full arch was found to be within ± 100 microns over 80 percent of the surfaces when printed at 25 or 50 microns.

Dental Model Resin

  • Print accurate margins and contacts within ± 35 microns on 25 micron print settings
  • Smooth surface finish, with color and hardness like analog stone
  • Insert removable dies with consistently tight fit

Download the Dental Model Data Sheet 

Dental Model

Property

Value

Method

Tensile Strength at Yield 61 MPa ASTM D 638-10
Young’s Modulus 2.7 GPa ASTM D 638-10
Elongation at Failure 5% ASTM D 638-10
Flexural Modulus 2.5 GPa ASTM C 790-10
Flexural Strain at 5% 95.8 MPa ASTM D 790-15
Heat Deflection temp @264 psi ≥ 55.9C ASTM D 648-07

Dental Model Resin

Dental SG Resin

An autoclavable, Class 1 biocompatible resin, Dental SG is designed for printing precise surgical guides and similar devices. Read our white paper to learn how we verified the performance of Dental SG, now trusted by clinicians for thousands of implant surgeries.

Dental SG Resin

This difference map shows a 3D scan of the printed surgical guide overlaid with the original 3D model. The color mapping indicates differences with the green areas revealing dimensional accuracy within ± 50 microns. In our accuracy study, we scanned 84 surgical guides printed with Dental SG resin with a desktop scanner. Results showed that printed models were dimensionally accurate within ± 100 microns over 93 percent of the surface area, providing a precise fit for dental surgical applications.

Dental SG Resin

Dental SG adheres to the following ISO standards:

EN-ISO 10993-1:2009/AC:2010
EN-ISO 20795-1:2013
EN-ISO 7405:2009/A1:2013

Dental SG Datasheet 
Dental SG Instructions for Use 
EC Declaration of Conformity 
Declaration of Biocompatibility 

Dental SG

Property

Value

Method

Flexural Strength ≥ 50MPa ISO 20795-1:2013
Flexural Modulus ≥ 1500MPa ISO 20795-1:2013
Shore Hardness ≥ 80D ISO 868:2003

Dental SG Resin

Dental LT Clear Resin

A Class IIa long-term biocompatible resin with high resistance to fracture and wear that is ideal for hard splints, retainers, and other direct-printed long-term orthodontic appliances. This clear material polishes to high optical transparency for beautiful final products. Download our application guide for detailed instructions.

Dental LT Clear Resin

An in-depth accuracy study of 80 Dental LT Clear printed splints showed that intaglio surfaces of Form 2 printed splints were dimensionally accurate within ± 100 microns over 80 percent of the intaglio surfaces, and within ± 125 microns over 90 percent of the surfaces. This was found to provide a precise fit on both models and patients.

Dental LT Clear

Dental LT Clear is a Class IIa biocompatible resin that is in conformity with the essential requirements and provisions of the Council Directive 93/42/EEC concerning medical devices as amended by Directive 2007/47/EC, and is in conformity with the following standards:

EN ISO 1641:2009
EN-ISO 10993-1:2009/AC:2010
EN-ISO 10993-3:2009
EN-ISO 10993-5:2009
EN 908:2008

Dental LT Clear Datasheet 
Dental LT Clear Instructions for Use
EC Declaration of Conformity

Dental LT Clear

Property

Value

Method

Flexural Strength No break ISO 20795-2:2013
Flexural Modulus ≥ 1300MPa ISO 20795-2:2013
Shore Hardness ≥ 80–90D ISO 868:2003

Dental LT Clear Resin

3D Printed Dentures

The first integrated workflow for 3D printed dentures.

We’re pushing the boundaries of digital dentistry–including making it possible to manufacture high-quality 3D printed dentures through a digital workflow that’s streamlined, end to end. Clinical studies and workflow tests are currently in development at Formlabs and our partner dental labs. Coming in 2018, sign up below to be notified of availability.

Standard Grey Resin

The smooth matte finish of standard Grey Resin shows details exceptionally well. It is ideal for a variety of dental applications, including orthodontic, diagnostic, and educational models, as well as for vacuum-forming aligners or other appliances. When used with a clear separator, Grey Resin can also be used to make retainers.

Take Dentistry Digital with the Form 2

The Form 2 complete package comes with everything you need to bring high precision 3D printing into your dental lab or dental office.

]