Large Volume Desktop 3D Printer with Wi-Fi
A desktop 3D printer with one of the largest workspaces among Plug & Play devices able to 3D print big models in one go. It works in LPD technology, Zortrax’s original take on Fused Deposition Modeling (FDM), guaranteeing highest quality results and low maintenance. It can create wireless networks of 3D printers thanks to Wi-Fi and Ethernet connectivity. It’s also equipped with a built-in camera that streams live feed of the 3D printing process via Z-SUITE slicing software, while the material endstop sensor decreases waste and the necessity for operator input. The upgraded extruder, hotend and new nozzle geometry allow Zortrax M300 Plus to 3D print with advanced and flex-type filaments. Side Covers are included.
Large workspace, measuring 300 x 300 x 300 mm, is enough to print big models in one go.
Wide filaments compatibility
The printer is designed to support wide range of dedicated and third-party filaments.
3D printing process can be remotely monitored through a built-in camera.
Material end detection
The printer will automatically switch into pause mode when it runs out of filament.
Advanced extruder and nozzle
An extruder with a nozzle geometry designed to support 3D printing with flex and nylon-type materials.
Zortrax M300 Plus is a Plug & Play device ready for high quality 3D printing right out of the box. The printer can be controlled via an intuitive touchscreen or remotely via Wi-Fi or Ethernet network. Automatic firmware updates introduce new functionalities and UI improvements on a regular basis.
Specification for Zortrax M300 Plus
|Build Volume||300 x 300 x 300 mm. (11.8 x 11.8 x 11.8 in)|
|Material diameter||1.75 mm. (0.069 in)|
|Nozzle diameter||0.4 mm. (0.016 in)|
|Support||Mechanically removed – printed with the same material as the model|
|Extruder||Single (compatible with demanding materials like TPU or nylon)|
|Extruder cooling system||Radial fan cooling the extruder block; two fans cooling the print|
|Platform||Heated; perforated and glass are applicable|
|Connectivity||Wi-Fi, Ethernet, USB|
|Touchscreen||4″ IPS 800 x 480|
|Technology||LPD (Layer Plastic Deposition) – depositing melted material layer by layer onto the build platform|
|Layer resolution||90-290 microns|
|Minimal wall thickness||400 microns (for 0.4 mm nozzle)|
|Platform levelling||Automatic measurement of platform points’ height|
|Maximum printing temperature (extruder)||290° C (554° F)|
|Maximum platform temperature||105° C (221° F)|
|Ambient operation temperature||20 – 30° C (68- 86° F)|
|Storage temperature||0 – 35° C (32- 95° F)|
|AC input||AC 110 V ~ 5.9 A 50/60 Hz
240 V ~ 2.5 A 50/60 Hz
|Maximum power consumption||360 W|
|Supported input file types||.stl, .obj, .dxf, .3mf|
|Supported operating systems||Mac OS up to Mojave version / Windows 7 and newer versions|
|In the box||3D Printer, Hotend V3, Side Covers, Z-SUITE, Starter Kit, Z-PETG or Z-HIPS, Spool holder, USB memory stick|