For demanding industries
New Pam Series P HT is using performance thermoplastics taking special care of high temperatures.
Dedicated to advanced applications, New Pam Series P HT is pushing engineering challenges forwards.
New print head
Our interlayer heating device is designed to increase Z direction mechanical performances. It keeps a warm zone over the part and preserve good adhesion between each layer.
A new high sheer extruder is dedicated to semi-cristallin materials for better flow control.
New frame and casing
The build volume is enhanced with new metallic casing and new heat
treatment for high temperature materials.
New heating room
Specially designed forced convection heating room device: hot air is recycled from inside the build volume for increased thermal regularity.
Heating room temperature control is integrated in Honeyprint software for easy set-up. The maximum temperature is 80°C.
New metal skin
New Pam Series P HT has a brand new metallic and insulated casing. Our team has developed the original wooden casing with great insulation performances without additive heated build chamber.
In regards of improving thermal regulation and increasing maximum room temperature we completely rethought our position towards new casing materials. Insulation plates are made out of glass wools and overlapping casing is in aluminum. This enables the best heating performances for the build volume and rapid rise in temperature.
The electronics benefit from the same improvement as New Pam Series P with two extruder boards and new wiring. In order to increase robustness and fine control over extruder boards, a specific casing and cooling is necessary.
New Pam Series P HT
|Technology||PAM (Pellet Additive Manufacturing)|
|Compatible materials||Injection moulding grades polymers|
|Material cartridge||2 High temperature|
|Extruders||2 high shear|
|Build volume||Ø300mm x H300mm (21×106 mm3)|
|Nozzles size (mm)||Ø 0.25 – 0.4 – 0.6 – 0.8 – 1 – 1.2|
|Resolution||40µm (Z) and 5µm (X,Y)|
|Software||Cura by Pollen AM – Honeyprint|
|Max. extrusion temperature||450°C|
|Max. Buildplate temperature||150°C and 250°C in option|
|Envelope||Double skin metal with thermal insulation|
|Heating Room||Up to 80°C|
|Radiant Disc||Up to 300°C|
|Max print speed||160 mm/s|
|AC input||230 V ~ 8 A – 50Hz|